INDUSTRIAL PRODUCT
Popcorn Maker Plastic Non Slip Foot Mould and Moulding Service
₹30.00
Popcorn Maker Plastic Non Slip Foot Mould and Moulding Service | Renovator Appliances Ltd
Product Overview
Popcorn Maker Plastic Non Slip Foot Mould and Moulding Service is designed for manufacturing precision-moulded non-slip feet used at the bottom of popcorn makers and popcorn dispensing appliances. These feet help support the appliance, maintain stability, provide ground clearance, and reduce unwanted movement during operation.
The non-slip foot can be customized according to the appliance weight, base geometry, mounting arrangement, floor-contact area, required grip, and operating environment. Depending on the design, the component can be produced as a rigid plastic foot or with a flexible elastomeric contact surface for improved grip.
Injection moulding enables consistent dimensions, accurate mounting geometry, controlled contact surfaces, and repeatable production for OEM and bulk manufacturing requirements.
Key Features
Precision-moulded non-slip foot for popcorn maker applications
Supports and stabilizes the appliance during operation
Helps maintain suitable ground clearance
Customized mounting geometry according to the appliance base
Screw-fit, push-fit, snap-fit, slot-fit, or integrated mounting options
Anti-slip contact surface according to application requirements
Reinforcing ribs and locating features where required
Controlled dimensions for consistent appliance assembly
Rigid plastic or flexible elastomeric construction as required
Customized colour, texture, and surface finish
Suitable for OEM and customized appliance production
Consistent dimensional repeatability for bulk manufacturing
Material selection according to load, temperature, vibration, and floor-contact requirements
Industrial Applications
| Application | Use |
|---|---|
| Popcorn Makers | Appliance support and anti-slip base |
| Electric Popcorn Machines | Stabilizing foot for appliance housing |
| Home Popcorn Appliances | Ground-contact and movement reduction |
| Commercial Popcorn Equipment | Base support and stability |
| Kitchen Appliances | Customized non-slip foot applications |
| OEM Appliance Manufacturing | Customized foot moulding and production |
Manufacturing Process
1. Product Design & Development
The foot dimensions, mounting arrangement, contact area, appliance weight, ground clearance, and required grip characteristics are established during product development. CAD drawings, technical drawings, or physical samples can be used to develop the required geometry.
2. Plastic Mould Design
The injection mould is designed according to the foot geometry, selected material, production quantity, and mounting method. Draft angles, parting line, gate location, cooling arrangement, ejection system, shrinkage, ribs, mounting features, and contact-surface geometry are considered during mould development.
3. Mould Manufacturing
The mould can be manufactured using suitable mould steels such as P20 Steel, H13 Steel, or S136 Steel. Steel selection depends on production volume, expected mould life, material characteristics, dimensional requirements, and surface-finish expectations.
4. Injection Moulding
The selected plastic or elastomeric material is processed and injected into the mould cavity under controlled conditions. Filling, packing, cooling, and ejection parameters are controlled to achieve consistent dimensions, mounting features, and contact-surface quality.
5. Finishing & Assembly Preparation
After moulding, runners or gates are removed where required. The feet are inspected for flash, deformation, sharp edges, surface defects, and dimensional variation before being prepared for installation on the popcorn maker.
6. Quality Inspection
Finished non-slip feet are checked for dimensions, mounting fitment, contact surface, stability, appearance, material consistency, and overall production quality.
Raw Materials
| Material | Typical Application |
|---|---|
| PP | Lightweight rigid foot designs |
| ABS | Rigid appliance support applications |
| Nylon | Applications requiring higher mechanical strength |
| Glass-Filled Nylon | Higher-load and higher-rigidity applications |
| PBT | Applications requiring improved dimensional and thermal stability |
| PC+ABS | Applications requiring impact strength and dimensional performance |
| TPE | Flexible anti-slip contact surfaces |
| TPU | Flexible and wear-resistant contact applications |
| EPDM | Flexible rubber-like contact applications where environmental suitability is required |
| Flame-Retardant Plastic | Applications requiring specified flame-retardant characteristics |
Material selection should be finalized according to appliance weight, static and dynamic loading, floor type, vibration, friction requirements, operating temperature, cleaning conditions, and proximity to heat-producing components.
Quality Control
Raw Material Inspection: Material grade, colour, hardness where applicable, and incoming material condition are checked.
Mould Inspection: Cavity surfaces, parting line, cooling system, ejection mechanism, mounting geometry, and contact-surface details are inspected.
Dimensional Inspection: Overall dimensions, mounting dimensions, height, diameter, and critical tolerances are verified.
Mounting Inspection: Screw holes, clips, tabs, slots, bosses, and other attachment features are checked.
Load Inspection: The foot's ability to support the intended appliance load is evaluated according to the design requirements.
Anti-Slip Inspection: Contact-surface geometry and grip characteristics are evaluated according to the intended floor and operating conditions.
Visual Inspection: Flash, sink marks, deformation, scratches, surface defects, and colour variation are checked.
Fitment Inspection: The foot is checked with the corresponding popcorn maker base.
Stability Inspection: Appliance stability and contact with the supporting surface are evaluated.
Application Validation: Vibration, temperature, moisture, cleaning, loading, and environmental suitability are evaluated according to the final application.
Packaging Inspection: Finished feet are packed to reduce deformation, surface damage, and handling-related defects.
Buyer Guide
Before ordering a Popcorn Maker Plastic Non Slip Foot Mould and Moulding Service, buyers should provide:
Required foot dimensions and geometry.
Appliance weight and expected load per foot.
CAD drawing, technical drawing, or physical sample.
Required mounting method and base interface.
Required ground clearance.
Floor-contact area and anti-slip requirements.
Expected vibration and operating conditions.
Required plastic or elastomeric material and grade.
Required hardness or flexibility for flexible contact surfaces.
Operating temperature and proximity to heating components.
Required colour, texture, and surface finish.
Expected production quantity and mould life requirement.
Prototype or pre-production sample requirements.
Why Choose Renovator Appliances Ltd?
Advanced Injection Moulding Facility
Renovator Appliances Ltd provides precision plastic injection moulding solutions for customized popcorn maker feet and appliance support components.
In-House Mould Manufacturing
Mould development can be coordinated according to the required foot geometry, mounting arrangement, load requirements, material, production volume, and surface finish.
OEM & ODM Manufacturing
Customized non-slip feet can be manufactured according to customer CAD files, technical drawings, physical samples, dimensions, and specific appliance requirements.
Quality Assurance
Dimensional, mounting, stability, visual, and application-related inspections help maintain consistent quality during moulding and production.
Cost-Effective Manufacturing
Optimized mould design and repeatable moulding processes support economical production for suitable medium- and high-volume manufacturing requirements.
Frequently Asked Questions
1. What is Popcorn Maker Plastic Non Slip Foot Mould and Moulding Service?
It is a customized mould manufacturing and injection moulding service for producing feet that support, stabilize, and help reduce unwanted movement of popcorn makers.
2. Which materials can be used for a popcorn maker non-slip foot?
PP, ABS, Nylon, Glass-Filled Nylon, PBT, PC+ABS, TPE, TPU, EPDM, and suitable flame-retardant materials can be considered according to the required load, flexibility, grip, temperature, and environmental conditions.
3. Can the non-slip foot be made with a flexible grip surface?
Yes. Depending on the design, a flexible TPE, TPU, EPDM, or other suitable elastomeric contact material can be considered where additional floor grip and cushioning are required.
4. Can the foot be customized according to the popcorn maker base?
Yes. The mounting hole, clip, slot, boss, height, diameter, contact area, and overall geometry can be customized according to the appliance base and assembly requirements.
5. Can Renovator Appliances Ltd manufacture customized non-slip foot moulds for OEM production?
Yes. Customized moulds and moulded non-slip feet can be developed for OEM and bulk production according to approved drawings, CAD files, samples, material specifications, and production requirements.
- SKU
- REN-0BE3D7F46659BA98D096DDFC