INDUSTRIAL PRODUCT
Electric Tandoor Plastic Cable Clip Mould and Moulding Service
₹20.00
Electric Tandoor Plastic Cable Clip Mould and Moulding Service | Renovator Appliances Ltd
Product Overview
Electric Tandoor Plastic Cable Clip is a precision-molded plastic cable management component designed to hold, guide, and secure electrical wires or cables within an electric tandoor. It helps keep wiring in a defined position and can reduce unwanted cable movement, tangling, or contact with nearby components.
Renovator Appliances Ltd provides Electric Tandoor Plastic Cable Clip Mould and Moulding Service for OEM and customized electric tandoor applications. The cable clip can be developed with snap-fit, push-fit, screw-mount, slot-mount, or other retention features according to the appliance assembly design.
Since the cable clip may be installed near electrical and heat-generating components, material selection and clip geometry should be validated according to the actual temperature, cable type, mechanical loading, vibration, electrical environment, and applicable appliance requirements.
Key Features
Designed for securing and organizing electrical wires and cables inside electric tandoors.
Helps maintain a defined cable routing path.
Snap-fit, push-fit, screw-mount, or slot-mount designs can be developed.
Suitable cable retention geometry according to cable diameter and bundle size.
Smooth edges can help reduce potential cable abrasion.
Compact construction for installation in limited internal spaces.
Mounting ribs, slots, tabs, bosses, and locating features can be customized.
Suitable for single-wire or cable-bundle retention applications depending on design.
Consistent dimensions for reliable assembly.
Colour, surface finish, and geometry can be customized.
Suitable for OEM, ODM, and customized electric tandoor production.
Industrial Applications
| Application | Use |
|---|---|
| Electric Tandoors | Internal wire and cable retention |
| Electric Ovens | Electrical cable routing and securing |
| OTG Appliances | Wire management components |
| Kitchen Heating Appliances | Internal cable organization |
| Countertop Cooking Appliances | Cable fixing and routing |
| OEM Appliance Manufacturing | Customized plastic cable clip production |
Manufacturing Process
1. Product Design & Development
The cable clip is designed according to the cable diameter, wire-bundle size, mounting location, available installation space, and required retention force. Cable entry, retention tabs, snap-fit geometry, mounting points, clearances, and smooth contact surfaces are considered during development.
2. Plastic Mould Design
A precision injection mould is designed according to the cable clip geometry and selected plastic material. Gate location, parting line, draft angles, ejection system, cooling arrangement, wall thickness, and material shrinkage are considered for consistent production.
3. Mould Manufacturing
The mould can be manufactured using suitable mould steels such as P20 Steel, H13 Steel, or S136 Steel, depending on production volume, dimensional requirements, surface finish, and expected mould life.
CNC machining, EDM, drilling, polishing, mould fitting, and trial moulding can be carried out as required.
4. Injection Moulding
The selected engineering or application-suitable plastic is processed through an injection moulding machine. Injection temperature, pressure, holding pressure, cooling time, and cycle parameters are controlled to achieve consistent dimensions and reliable clip geometry.
5. Finishing & Assembly Preparation
After moulding, the cable clips are inspected and trimmed where required. Flash, sharp edges, excessive gate marks, short shots, sink marks, and other moulding imperfections are controlled before assembly.
6. Quality Inspection
Finished cable clips are checked for dimensions, retention features, mounting interfaces, surface condition, and structural integrity. Sample clips can be tested with the specified cable or wire bundle and appliance mounting location for proper fitment and retention.
Raw Materials
| Material | Typical Use |
|---|---|
| PP | Suitable for many general-purpose cable retention applications |
| Nylon (PA) | Can be selected where increased mechanical strength and durability are required |
| Glass-Filled Nylon | Suitable for reinforced cable-retention applications |
| PBT | Suitable where dimensional stability and electrical/thermal performance are required |
| ABS | Can be considered for suitable internal cable management applications |
| PC+ABS | Suitable where impact strength and dimensional stability are required |
| Flame-Retardant Plastic | Can be selected where specific resistance to ignition or flame propagation is required |
| Heat-Resistant Engineering Plastic | Suitable where the clip is exposed to elevated temperatures |
The final material should be selected according to cable loading, retention requirements, temperature exposure, vibration, electrical environment, and applicable appliance requirements. Where the clip is positioned close to heating elements, the actual operating temperature should be evaluated before final material selection.
Quality Control
Renovator Appliances Ltd follows controlled inspection procedures for Electric Tandoor Plastic Cable Clip production:
Raw Material Inspection: Plastic grade and incoming material quality are checked according to specified requirements.
Mould Inspection: Cavity condition, retention geometry, ejection operation, and critical mould features are inspected.
Dimensional Inspection: Clip dimensions, cable passage, mounting interface, wall thickness, and critical clearances are verified.
Visual Inspection: Components are checked for flash, cracks, short shots, sink marks, burn marks, warpage, and surface defects.
Cable Fitment Inspection: Sample clips can be checked with the specified wire or cable diameter to verify proper fitment.
Retention Inspection: Clip engagement and cable retention can be evaluated according to customer-defined requirements.
Thermal Suitability Review: Material performance should be validated against actual operating temperatures and heat exposure.
Packaging Inspection: Finished components are appropriately packed to minimize deformation, scratches, and contamination.
Buyer Guide
When sourcing an Electric Tandoor Plastic Cable Clip, buyers should consider:
Cable Diameter: Provide the individual wire or cable diameter.
Cable Bundle Size: Specify the maximum bundle diameter if multiple wires are secured together.
Mounting Method: Specify snap-fit, push-fit, screw mounting, slot mounting, adhesive mounting, or other requirements.
Retention Requirement: Define the required cable holding and release characteristics.
Installation Location: Provide the exact mounting position and available space.
Temperature Exposure: Specify continuous and peak temperature at the installation location.
Material Requirement: Select a suitable engineering, flame-retardant, or heat-resistant plastic according to application requirements.
Electrical Environment: Consider insulation, clearance, and separation requirements around electrical wiring.
Production Quantity: Select the mould configuration according to expected production volume.
Quality Requirements: Define dimensional tolerances, colour, surface finish, cable fitment, and retention requirements.
Why Choose Renovator Appliances Ltd?
Advanced Injection Moulding Facility
Renovator Appliances Ltd supports precision plastic component manufacturing using controlled injection moulding processes for appliance and electrical cable-management applications.
In-House Mould Manufacturing
Our mould manufacturing capability supports customized cable clip designs with application-specific retention geometry, mounting features, and dimensional requirements.
OEM & ODM Manufacturing
We support OEM and ODM requirements from product development and mould manufacturing through injection moulding and production supply.
Quality Assurance
Dimensional, visual, cable-fitment, retention, and moulding inspections help maintain consistent quality for molded cable management components.
Cost-Effective Manufacturing
Optimized mould design, suitable material selection, and repeatable injection moulding processes can support economical production for customized electric tandoor cable clips.
Frequently Asked Questions
1. What is an Electric Tandoor Plastic Cable Clip?
It is a molded plastic component used to hold, guide, and organize electrical wires or cables within an electric tandoor.
2. Which materials can be used for a plastic cable clip?
Depending on the application, PP, Nylon, Glass-Filled Nylon, PBT, ABS, PC+ABS, flame-retardant plastics, or heat-resistant engineering plastics may be considered. The final material should be selected according to temperature, mechanical, and electrical requirements.
3. Can the cable clip be customized?
Yes. Cable passage diameter, bundle size, mounting method, retention force, snap-fit geometry, mounting slots, clips, ribs, colour, and overall dimensions can be customized according to the appliance design.
4. Can Renovator manufacture the mould for this component?
Yes. Renovator Appliances Ltd provides mould manufacturing and injection moulding services for customized Electric Tandoor Plastic Cable Clip requirements.
5. What information is required for manufacturing?
A 2D drawing, 3D CAD model, sample component, cable diameter, bundle size, mounting location, mounting method, retention requirements, operating temperature, material specification, production quantity, and fitment requirements are useful for accurate development.
- SKU
- REN-63443D67C4D8BA4B19BC96B8