INDUSTRIAL PRODUCT
Electric Tandoor Plastic Heating Plate Support Mould and Moulding Service
₹50.00
Electric Tandoor Plastic Heating Plate Support Mould and Moulding Service | Renovator Appliances Ltd
Product Overview
Electric Tandoor Plastic Heating Plate Support is a specially designed plastic support component used to position, hold, and stabilize the heating plate or heating assembly inside an electric tandoor. It helps maintain the required alignment between the heating plate, internal body structure, and other nearby components while providing a defined mounting and support interface.
Renovator Appliances Ltd provides Electric Tandoor Plastic Heating Plate Support Mould and Moulding Service for OEM and customized electric tandoor applications. The component can be developed with mounting bosses, locating points, ribs, slots, clips, or other functional features according to the appliance design.
Because the component may operate close to a heating source, the selected plastic grade must be validated for the actual operating temperature, thermal exposure duration, mechanical loading, and electrical environment of the finished appliance.
Key Features
Designed for supporting and positioning the electric tandoor heating plate or heating assembly.
Accurate mounting and locating features for proper component alignment.
Reinforcing ribs can be incorporated for improved structural stability.
Screw bosses, slots, clips, or snap-fit features can be developed according to the assembly requirement.
Controlled dimensions for consistent fitment with mating components.
Lightweight construction compared with conventional metal support components where plastic is technically suitable.
Suitable for customized OEM and ODM electric tandoor designs.
Surface finish, colour, and texture can be customized according to product requirements.
Material selection can be optimized according to thermal, mechanical, and electrical requirements.
Industrial Applications
| Application | Use |
|---|---|
| Electric Tandoors | Heating plate support and positioning |
| Electric Ovens | Internal heating assembly support applications |
| OTG Appliances | Support components around heating assemblies |
| Countertop Cooking Appliances | Internal structural support |
| Kitchen Heating Appliances | Heating-component positioning and support |
| OEM Appliance Manufacturing | Customized heating plate support production |
Manufacturing Process
1. Product Design & Development
The heating plate support is developed according to the appliance assembly drawing, heating plate dimensions, mounting arrangement, available installation space, and required clearances. Critical areas such as screw bosses, locating points, ribs, and heating-component clearances are considered during design.
2. Plastic Mould Design
A precision injection mould is designed according to the component geometry and selected plastic material. Gate location, cooling channels, ejection system, parting line, draft angles, and shrinkage allowance are considered to achieve consistent moulded parts.
3. Mould Manufacturing
The mould is manufactured using suitable mould steel such as P20 Steel, H13 Steel, or S136 Steel, depending on production volume, durability, surface-finish requirements, and application. CNC machining, EDM, drilling, polishing, fitting, and mould trials are carried out as required.
4. Injection Moulding
The selected engineering or heat-resistant plastic material is processed through an injection moulding machine. Controlled injection pressure, temperature, holding pressure, cooling time, and cycle parameters help maintain dimensional consistency and repeatable production.
5. Finishing & Assembly Preparation
After moulding, the heating plate support is inspected and, where required, trimmed or finished. Gate marks, flash, sharp edges, and other moulding imperfections are controlled before the component is prepared for assembly.
6. Quality Inspection
Finished components are checked for dimensions, mounting features, surface appearance, fitment, structural integrity, and other customer-defined requirements before dispatch.
Raw Materials
| Material | Typical Use |
|---|---|
| PBT | Suitable for applications requiring dimensional stability and electrical/thermal performance |
| Nylon (PA) | Used where higher mechanical strength and durability are required |
| Glass-Filled Nylon | Suitable for reinforced structural support applications |
| PC+ABS | Used where impact strength and dimensional stability are required |
| ABS | Suitable for applications where thermal exposure is within the material's validated range |
| Heat-Resistant Engineering Plastic | Used for applications involving elevated operating temperatures |
| Flame-Retardant Plastic | Can be selected where the appliance design requires enhanced resistance to ignition or flame propagation |
The final material should be selected only after evaluating the actual temperature near the heating plate, continuous and peak thermal exposure, mechanical load, electrical clearances, and applicable appliance requirements.
Quality Control
Renovator Appliances Ltd follows controlled inspection procedures for Electric Tandoor Plastic Heating Plate Support production:
Raw Material Inspection: Plastic grade and incoming material quality are checked according to production requirements.
Mould Inspection: Mould condition, cavity surfaces, ejector operation, and critical dimensions are inspected.
Dimensional Inspection: Critical dimensions, mounting holes, locating features, and mating interfaces are verified.
Visual Inspection: Parts are checked for flash, sink marks, short shots, warpage, cracks, burn marks, and surface defects.
Fitment & Functional Inspection: Sample parts can be checked with the heating plate and related internal components for proper positioning and assembly.
Thermal Suitability Review: Material and component design should be validated against the actual operating temperature and heating conditions.
Packaging Inspection: Components are packed appropriately to minimize damage, deformation, and contamination during handling and transportation.
Buyer Guide
When sourcing an Electric Tandoor Plastic Heating Plate Support, buyers should consider:
Heating Plate Dimensions: Provide the exact heating plate or heating assembly dimensions.
Operating Temperature: Specify the expected continuous and peak temperature exposure.
Mounting Arrangement: Share screw-hole positions, clips, slots, bosses, or other fixing requirements.
Material Requirement: Select a suitable engineering or heat-resistant plastic based on actual application conditions.
Load Requirement: Consider the weight and mechanical load transferred through the support.
Assembly Clearance: Maintain adequate clearance from heating elements and other heat-generating components.
Production Volume: Choose the mould configuration according to expected annual or batch production requirements.
Quality Requirements: Define dimensional tolerances, surface finish, colour, and fitment requirements before production.
Why Choose Renovator Appliances Ltd?
Advanced Injection Moulding Facility
Renovator Appliances Ltd supports precision plastic component manufacturing using injection moulding processes suitable for appliance components and customized production requirements.
In-House Mould Manufacturing
Our mould-making capability supports the development of customized heating plate support moulds with application-specific geometry and production requirements.
OEM & ODM Manufacturing
We can support OEM and ODM requirements from component development and mould manufacturing through injection moulding and production supply.
Quality Assurance
Controlled moulding parameters and dimensional, visual, and fitment inspections help maintain consistent component quality across production batches.
Cost-Effective Manufacturing
Optimized mould design, suitable material selection, and repeatable injection moulding processes can help achieve cost-effective production for both standard and customized electric tandoor components.
Frequently Asked Questions
1. What is an Electric Tandoor Plastic Heating Plate Support?
It is a plastic support component designed to position, hold, or stabilize the heating plate or heating assembly inside an electric tandoor.
2. Which plastic materials can be used for the heating plate support?
Depending on the application, materials such as PBT, Nylon, Glass-Filled Nylon, PC+ABS, ABS, heat-resistant engineering plastics, or flame-retardant grades may be considered. The final material must be validated for the actual thermal and mechanical conditions.
3. Can the heating plate support be customized?
Yes. The component can be customized according to heating plate dimensions, mounting points, screw bosses, locating features, ribs, slots, clips, clearances, colour, and surface-finish requirements.
4. Can Renovator manufacture the mould as well as the plastic component?
Yes. Renovator Appliances Ltd provides mould manufacturing and injection moulding services for customized Electric Tandoor Plastic Heating Plate Support requirements.
5. What information should be provided for manufacturing?
Buyers should ideally provide a 2D drawing, 3D CAD model, sample component, heating plate dimensions, mounting details, operating temperature, required material, colour, production quantity, and applicable quality requirements.
- SKU
- REN-17365D23839C5AAF1B151C65