Electric Tandoor Plastic Inner Lid Mould and Moulding Service | Renovator Appliances Ltd

Product Overview

The Electric Tandoor Plastic Inner Lid is a moulded plastic component positioned on the inner side of an electric tandoor lid. It can provide structural support, component positioning, protective coverage, and a defined interface between the lid assembly and the cooking chamber. Depending on the appliance design, the inner lid can also incorporate openings or features for steam, wiring, fasteners, insulation, or other adjoining components.

Renovator Appliances Ltd. provides Electric Tandoor Plastic Inner Lid Mould and Moulding Service for OEM and customized electric tandoor applications. The component can be developed according to customer drawings, 3D CAD models, existing samples, or application-specific requirements.

Because the inner lid may be exposed to elevated temperatures, steam, moisture, and heat transferred from the cooking chamber, material selection and component design should be validated according to the actual operating conditions and applicable appliance requirements.

Key Features

• Precision-moulded plastic inner lid for electric tandoor assemblies

• Designed for internal lid support, protection, and component integration

• Can be customized according to the lid and cooking chamber geometry

• Suitable mounting bosses, holes, ribs, clips, and locating features

• Can incorporate openings for steam, wiring, fasteners, or adjoining components

• Controlled wall thickness for dimensional consistency

• Smooth and suitable surface finish for internal appliance applications

• Heat-resistant plastic options can be considered where required

• Suitable for OEM and customized production

• Available for prototype development and high-volume manufacturing

Industrial Applications

Manufacturing Process

1. Product Design & Development

The inner lid is developed according to the electric tandoor lid structure, cooking chamber dimensions, adjoining components, available space, mounting arrangement, and thermal exposure. Wall thickness, mounting points, ribs, openings, clearances, and locating features are considered during product development.

2. Plastic Mould Design

A precision injection mould is designed according to the final inner lid geometry. Cavity configuration, parting line, gate location, ejection system, cooling channels, draft angles, wall thickness, and material shrinkage are considered to achieve consistent production.

3. Mould Manufacturing

The mould can be manufactured using suitable tool steels such as P20 Steel, H13 Steel, or S136 Steel depending on production volume, material selection, surface requirements, and expected mould life. CNC machining, EDM, grinding, polishing, and mould fitting are carried out as required.

4. Injection Moulding

The selected plastic material is heated and injected into the mould cavity under controlled processing conditions. Injection pressure, melt temperature, holding pressure, cooling time, and cycle parameters are optimized according to the selected material and inner lid design.

5. Finishing & Assembly Preparation

After moulding, the inner lids are inspected for gate vestiges, flash, warpage, sink marks, and surface defects. Required trimming or finishing is performed, and critical mounting and locating areas are prepared for assembly.

6. Quality Inspection

Finished inner lids are checked for dimensional accuracy, mounting features, openings, surface quality, fitment, and moulding consistency. Components exposed to heat should also be evaluated under the actual operating conditions.

Raw Materials

The final material should be selected based on actual operating temperature, continuous heat exposure, steam and moisture conditions, mechanical requirements, dimensional stability, cleaning conditions, and the component's proximity to heating elements.

Quality Control

Renovator Appliances Ltd. can implement multiple inspection stages to maintain consistent Electric Tandoor Plastic Inner Lid quality:

• Raw Material Inspection: Verification of material grade, specification, and batch consistency.

• Mould Inspection: Checking cavity condition, mould alignment, cooling system, ejection, and critical tooling dimensions.

• Dimensional Inspection: Verification of overall dimensions, inner and outer profiles, wall thickness, mounting holes, bosses, openings, and critical locating features.

• Visual Inspection: Checking for flash, sink marks, short moulding, burn marks, cracks, warpage, colour variation, and surface defects.

• Fitment & Functional Inspection: Checking alignment, mounting, retention, clearances, and compatibility with the lid and adjoining components.

• Thermal/Application Validation: Where the component is exposed to heat or steam, material and component suitability should be evaluated against actual operating conditions.

• Packaging Inspection: Proper packaging to prevent deformation, scratches, contamination, and transportation damage.

Buyer Guide

When sourcing an Electric Tandoor Plastic Inner Lid, buyers should provide the required dimensions, lid geometry, mounting arrangement, adjoining component details, openings, wall thickness, material requirement, operating temperature, steam/moisture exposure, colour, surface finish, and expected production quantity.

For accurate mould development, customers can provide a 2D drawing, 3D CAD model, existing sample, or complete product specification. If the inner lid is located close to heating elements, the expected temperature range and continuous thermal exposure should be clearly specified before finalizing the plastic grade.

Buyers should also provide details regarding mounting method, insulation or separation requirements, cleaning conditions, and the required clearance from heated components to ensure appropriate product and mould design.

Why Choose Renovator Appliances Ltd?

Advanced Injection Moulding Facility

Our injection moulding capabilities support production of precision plastic components with customized dimensions, geometries, and material grades for kitchen and heating appliances.

In-House Mould Manufacturing

Our mould manufacturing capability supports customized inner lid mould development based on customer drawings, CAD models, samples, and appliance requirements.

OEM & ODM Manufacturing

We provide OEM and ODM manufacturing solutions for customized electric tandoor plastic components based on application-specific specifications.

Quality Assurance

Dimensional, visual, material, fitment, and application-based inspections help maintain consistent production quality.

Cost-Effective Manufacturing

Optimized mould design, suitable material selection, cavity planning, and controlled injection moulding parameters help support economical production for prototype and volume requirements.

Frequently Asked Questions

1. What is an Electric Tandoor Plastic Inner Lid?

It is a moulded plastic component fitted on the inner side of an electric tandoor lid to provide support, protection, component positioning, and integration with adjoining parts.

2. Which materials can be used for an electric tandoor inner lid?

Depending on the application, high-temperature PP, PBT, Nylon, Glass-Filled Nylon, suitable PC+ABS, heat-resistant engineering plastics, and appropriate flame-retardant plastics can be considered.

3. Can the inner lid be customized according to the tandoor design?

Yes. Dimensions, profiles, mounting holes, bosses, ribs, clips, openings, locating features, colour, surface finish, and other design parameters can be customized according to the appliance.

4. Is heat-resistant material required for the inner lid?

It depends on the component's actual location and thermal exposure. If the inner lid is exposed to elevated temperatures or continuous heat, a suitable heat-resistant material should be evaluated and validated for the actual operating conditions.

5. Does Renovator provide both mould manufacturing and injection moulding?

Yes. Renovator Appliances Ltd. provides mould manufacturing and injection moulding services for customized Electric Tandoor Plastic Inner Lid production, subject to final design and technical specifications.